PHYSICAL-CHEMICAL FEATURES :
VISCOSITY ( FORD C. 6 at 20°C ) : 30-35 ”
DENSITY ( at 20°C ) : 1.30
SOLID CONTENTS : 70 % ± 1
POT-LIFE ( at 20°C ) : 3 hs. ready for use
APPLICATION :
By spray , using traditional or electrostatic spray guns . Nozzle opening 2,5 mm and pressure 3-4
atm. After mixing A + B the product is ready-to-use for application on chip-board and MDF. To
cover veneer a reduction by EM 754 thinner for PU’s is necessary (20%); to avoid cracking never
apply heavy coats . 2-3 coats are necessary to cover substrate , leaving about 1 hs. between the
coats. After 8-10 hs., after sanding , apply PU glossy or matt finish ( EM 8000 and following or EM
7000 and following ). Yield is according to substrate and is about 4-5 smt per kg.
DRYING at 20°C :
EM C.15 EM C.40
DUST FREE : 10′ 15’
TOUCH FREE : 1 h 1.5 hs
DEEP DRY : 24 hs. >24 hs.
SANDABLE : 12 hs. >12 hs.
and OVERCOATING
EMPLOYMENTS AND WARNINGS
As a basecoat on wooden and MDF substrates. On highly porous substrates it is advisable to apply
as a primer a coat of clear PU basecoat reduced at 40-50% by EM 754.
After 1 h- 1.5 hs without sanding this product can be sprayed.
Do not use generally on items outdoor exposed. Ask our support technical service. In hot and humid
climate increase the reducing to avoid pinholes.A white PU primer with high pigment coverage, fast drying, and excellent sandability. Versatile in application, it is recommended as a basecoat for pigmented furniture, doors, skirting boards, and other similar substrates.