PHYSICAL-CHEMICAL FEATURES
DENSITY at 20°C. : .965
VISCOSITY FC ∅ 4 at 20°C. : 55”- 60”
SOLID CONTENTS : 48 ± 1%
POT-LIFE at 20°C. : 4 hs. with EM C 1 at 100%
over 6 hs. with EM C 40 at 50%
APPLICATION
It can be applied with various means: brush, spray, curtain:
BRUSH : After adding hardener add EM 754 P.U.THINNER at 20%. Oner or more coats can be applied waiting at
least 2-3 hs. between .
SPRAY : Add hardener and thinner as above. According to requirements thinner can be added at a higher rate (as far as
40% calculated on part A). Apply one or more coats leaving at least 70-80’ between. Traditional spray guns as well as
airless or airmix pumps can be used. For standard spray-guns nozzle opening 1.8-2 mm. pressure 3-4 atm.
CURTAIN : For this application we advise to add EM C 1 hardener at a rate of 90% and reducing at 10-15% by EM
754. When using EM C 40 follow the a.m. rate. One or two coats can be applied leaving at least 90’ between; quantity
is about 140-160 cc/smt/coat.
It can be applied on various substrates. When using EM C 1, it can be employed also as basecoat for parquet floorings.
In this case, add EM C 1 at 100% and reduce by EM 754 at 20-30%; apply by brush or parquetting roller.
Yield is about 6/7 smt/lt (product already added with hardener and thinner).
DRYING at 20°C and 60% relative moisture
EM C 1 100% EM C 40 50%
DUST FREE : 20 – 25’ 35 – 40’
TOUCH FREE : 90 – 100’ 2 – 3 hs.
DEEP DRY : over 24 hs. over 36 hs.
SANDABLE after : about 12 hs. about 24 hs.
EMPLOYMENTS AND WARNINGS
Suitable to prepare substrates for furniture, frames and windows whenever hardness and transparency are requested as
main features. Important warnings : to obtain a right application it is necessary verify that
• timing of coats is correct and reduction is the one indicated;
• when stain is applied it must be completely dry; and in this case the first coat must very very light(max 60-80
cc/smt) and reduced
• substrate moisture is less than 20%
• substrate does not have traces of grease which may affect adhesion;
• the timber itself has not been whitened by ammonia and hydrogen peroxide;
• temperature of environment is between 10°C and 28°C.
To obtain a better coverage it is advised to sand slightly between the coats.A two-pack PU clear sanding sealer featuring high transparency, excellent hardness, and elasticity. It offers a reliable foundation for outdoor coating systems and it is the ideal foundation for the highest quality furniture varnishing systems. It can be used also as basecoat for parquet flooring by brush or parquetting roller